Product Overview
The Freedom Won LiTE 2 Commercial 100/80 HV is a 100 kWh high-voltage lithium iron phosphate (LiFePO4) battery for commercial energy-storage installations. It provides 80 kWh of energy at 80% depth of discharge (DoD), with a nominal voltage of 512 V and 96-97% round-trip efficiency. The HV model is suitable for Freedom Won Encore HPS50, HPS100 and HPS150 hybrid battery inverters.
Designed for indoor use, the battery combines an on-board battery management system (BMS), internal trip protection and a shunt-trip circuit breaker for monitored commercial battery storage applications.
Key Features
- 100 kWh total energy capacity, providing 80 kWh at 80% DoD or 90 kWh at 90% DoD.
- 512 V nominal battery voltage with a 456-568 V operating range.
- 200 A maximum and continuous charge current, with up to 102 kW charge power.
- 300 A maximum / 250 A continuous discharge current, with 154 kW maximum / 128 kW continuous discharge power.
- On-board BMS and internal trip protection, with protection for overcurrent, cell under- and over-voltage, temperature, weak-cell detection and other critical events.
- RJ45 Ethernet connection for eConnect diagnostics, troubleshooting and remote monitoring, plus RJ45 CAN for BMS-to-inverter communication.
- 3 mm powder-coated aluminium, tamper-proof enclosure for indoor installations.
- Natural-convection cooling and a front-panel state-of-charge display, error indication, error-reset button and main breaker.
Applications
- Commercial solar-plus-storage systems using compatible Freedom Won Encore HPS hybrid battery inverters.
- Daily energy shifting and battery-backed supply for commercial facilities.
- High-voltage battery storage installations where high charge and discharge power is required.
Why Choose This Product?
The LiTE 2 Commercial 100/80 HV offers substantial usable energy with a high-voltage architecture and integrated battery controls. Its documented interface, protection and cable configuration support considered commercial system design when paired with the specified compatible inverter range.
Important Notes
- For indoor use only. Allow for the 800 kg battery mass and plan handling, positioning and installation accordingly.
- The HV model is suitable for Freedom Won Encore HPS50, HPS100 and HPS150 hybrid battery inverters. Confirm the complete system design, settings and installation requirements before ordering.
- Maximum discharge current is rated for five minutes in every ten-minute period. A 1.5 x maximum-current overload can be handled for five seconds. Current ratings apply at a battery temperature of 10°C to 25°C; derating applies outside this range.
- Charging below 0°C is not permitted. Extended periods above 30°C are not recommended for optimum battery life.
- Standard DC power cables are 4.0 m long and exit on the right-hand side near the floor. Up to 8 m cables are available at extra cost when specified with the order. A cable trench or cable tray is recommended for routing cables to floor-standing inverters.
- Remote monitoring requires an internet connection. Installation and commissioning should be completed by a qualified professional.
- The standard warranty is 10 years (or 6,000 cycles) at 80% DoD, 0.5C maximum discharge, 0.25C maximum charge and a maximum temperature of 25°C. Refer to the Freedom Won warranty document for full terms.
Technical Specifications
Specification
Detail
Brand
Freedom Won
Model
LiTE 2 Commercial 100/80 HV
Product Type
High-voltage lithium iron phosphate commercial battery
Battery Chemistry
Lithium iron phosphate (LiFePO4)
Total Energy Capacity
100 kWh
Energy at 80% DoD
80 kWh
Energy at 90% DoD
90 kWh
Current Capacity
200 Ah
Nominal Voltage
512 V
Operating Voltage Range
456-568 V
Maximum / Continuous Charge Current
200 A
Maximum / Continuous Charge Power
102 kW
Maximum / Continuous Discharge Current
300 A / 250 A
Maximum / Continuous Discharge Power
154 kW / 128 kW
Maximum Recommended Inverter Total Rated Power (Continuous)
120 kVA
Short Circuit Current
5 kA
Round-Trip Efficiency
96-97%
Battery Dimensions (H x W x D)
1,405 x 1,636 x 365 mm (excluding protrusions)
Crated Dimensions (H x W x D)
1,600 x 1,790 x 575 mm
Battery Weight
800 kg
Crated Weight
914 kg
DC Connection Power Cables
1 x 95 sq.mm Helukabel NSGAF detachable power connector per electrode; 4.0 m standard cable length
Cooling
Natural convection
Enclosure
3 mm thick powder-coated aluminium, tamper-proof, indoor use
Control Interface
RJ45 Ethernet for eConnect diagnostics and troubleshooting; RJ45 CAN for BMS and inverter communication
Remote Monitoring
Real-time data logging and remote monitoring over Ethernet; internet connection required
Suitable Ambient Temperature
10°C to 25°C
Extreme Operating Temperature
-20°C to +55°C
Warranty
10 years (or 6,000 cycles) at 80% DoD, 0.5C maximum discharge, 0.25C maximum charge and maximum 25°C
Expected Service Life
More than 16 years (more than 6,000 cycles) at 80% DoD per cycle
Battery Standards
Designed and built according to IEC 62619, IEC 62040, IEC 61000 and UN38.3